PRODUCT DETAILS 
Material : Die Casting (Chromium plating) Pipe Diameter : Ø12.7mm
Grips rods up to 3/4 in. diameter (19mm). Holding angle of jaw is adjustable. Can be locked with a wingnut. Wingnut also allows length adjustment.
Grips rods up to 3/4 in. diameter (19mm). Holding angle of jaw is adjustable. Can be locked with a wingnut. Wingnut also allows length adjustment.
Two-Prong Clamp, Dual adjustment clamp has a maximum grip size of 73mm. Two-prong design is ideal for beakers, flasks, and test tubes. Jaws adjust independently. Overall length is 255mm. Clamp extends 127mm
All-position holder connects at any angle in any plane. Consists of two holders connected by double plate-joint which sets holders 900 from each other.
The design of the electrical “Lift 240“ is identical with that of the mechanical 240 x 240 mm WIGGENS lab jack. Both variants can be used and replaced, as desired, in existing structures. An end stop can be manually adjusted at the outside.
Available to support experiment tools such as stirrers, water baths, flasks and etc in height control
Truebore Flexible Drive Shaft Overhead Stirrer
SHAFT Fully flexible drive shaft connects the motor to any size or type of reactor stir shaft.
Very low vapor pressure, highly inert, nonflammable grease.
Good chemical stability, no reaction with oxygen, hydrogen, hydrocarbons and other chemical substances. The usable temperature range is -35℃ ~ 290℃ .
HI-LUBE Lubricant for Strong Liquids
Resistance to acid and alkali, soluble in organic solvents, and suitable for oxidizing gases. The temperature can reach260℃ it is non-combustible, and non-oxidized.
Smooth, stable, odorless oil based lubricants, free of silicone, suitable for lubrication of joint and piston. The melting point is 52℃ , can be cleared with xylene.
'STIR-LUBE' Ace Trubore®, Stirrer Lubricant
A superior, low melting, silicone-base lubricant which liquifies at body temperature.
Designed to be used with 8068, 8070, 8071, 8074 or 8078 stirring shafts. Handy for positioning shaft in bearing, and preventing shaft from dropping into flask.
For use with Glass and Metal Stirrer Shafts
This product is designed to provide an effective guide for Glass and Metal Shaft stirrers over a range of temperatures without shedding particles from the seal, whilst maintaining a vacuum.
The newest design of mechanical stirring seals with all parts that are in contact with liquid or vapor being made of PTFE,RULON, or PEEK material.
Universal Stirrer Guides for use with standard taper ground glass joints can be used with PTFE Shaft Stirrers and glass and meatal shaft stirrers.
Magnetic drives are designed for agitating a fully vacuumed flask. Multi-functional easy to replace impeller.
Предприятие Контакты Statement Privacy Policy
Copyright © 2024 WIGGENS CO., LTD. All rights reserved.
